Collecting rainwater off a polytunnel

Started by Ed^Chigliak, July 03, 2004, 13:59:01

Previous topic - Next topic

Ed^Chigliak

I have erected a 10x15ft polytunnel and was wondering if anyone has tried collecting rain water from the sides. I have been considering a guttering run about 1ft away from the polytunnel sides mounted on posts and then a polythene skirt to bridge the gap. Some sort of waterproof repair tape to fix the skirt to the side of the polytunnel and same again on the inside face of the guttering. What do you think?

Ed^Chigliak


kenkew

Your Duct-tape skirt into the trough should work, but the  weight of water during a downpour would be too much for the tape to support the guttering. You could mount the gutter on posts close to your tunnel. Your water butt would also need to be partly sunk into the ground. Wait for a really dry day to stick the duct-tape on as the slightest bit of damp will affect it's sticking.

abstract gardener

get some aquatic sealent, the stuff they use for patching ponds, that will stick any plastic and once its stuck its stuck, its water proof

tig

cant really help u out with the guttering part ed
but if your new to polytunnels can i recommend a book call... gardening under plastic.. by bernard salt
:)

Powered by EzPortal