Uses for pallets.

[carolinej]

Hello :)

I have a friend who works for BT. He has been looking for somewhere to get rid of all the pallets he gets through. It looks like I will be able to get my hands on loads of them. ;D ;D ;D

I am going to use some for compost bins, and some , taken apart, to make the sides of raised beds.

Does anyone have any other suggestions for uses for pallets, or any suggestions for the best way to make compost bins out of them?

Thanks

cj :)

[carolinej]

[dgillings]

Shhh! You can't say things like that around here - your likely to get visiters from all corners of the Europe at strange times of the day and night requested your pallets!!

I'd die for a source like that!

The best plans for a composter I saw was a frame made with the large wooden "beams" of the pallets with the slats taken off and used on the sides - with about a 5mm gap between them to allow the bin to breath. The front had batons both sides with a slot between them so that you could just slide the front in and out when ever you needed to turn it over.

Better still would be a double bin so that you have an active and a waiting bin.

Daniel

[kt.]

Make a frame for cold-frame bases. What about edging for your paths? ;)

[Deb P]

The best plans for a composter I saw was a frame made with the large wooden "beams" of the pallets with the slats taken off and used on the sides - with about a 5mm gap between them to allow the bin to breath. The front had batons both sides with a slot between them so that you could just slide the front in and out when ever you needed to turn it over.

Better still would be a double bin so that you have an active and a waiting bin.

Daniel

OH made this one....front pieces are removable to get at contents and keep stuff in as they fill.

[cornykev]

See that you spend so much time on the lottie Deb you even have a bath there. ;) ;D ;D ;D ;D ;D

[Blue Bird]

Used mine for triple bins 2 for composting and 1 for manure also used 2 to make cold frame
use for steps and have swapped them with neighbours for all sorts of bits and bobs including space in a greenhouse have not got one.

Most of the oldies cannot get them as they have no car so are happy to part exchange for bits or barter for their time

good luck with your DIY ;D

[euronerd]

If you already have a wheel you could make a barrow.  ;D This one was made to carry pallets on to my plot from the road




Geoff.

[sutton girl]

I made a fence round my allotment with old pallets look neat and also is free

[Nelson]

If you already have a wheel you could make a barrow.  ;D This one was made to carry pallets on to my plot from the road
*snip*
Geoff.

Genius!

You should've seen me last night with three pallets balances on top of an ordinary barrow.  I was doing ok until I got to the first plot with a fence, then I crashed into a shed, then the barrow fell off the path and overturned  :-[  Then I gave up and carried the buggers!

[mikey]

Used as they come, 4 to build a quick compost bin, wire up the corners

Stripped down (which can be bl**dy hard work) re-use timber and nails for:

Compost Bins
Fencing
Door for the Shed
Bed Edging (two planks one above the other nailed to pegs)
Pegs, cut to +/- 15 inches long (and cut lengthwise, thus getting 2 for the wood of 1)
Seed tray ends, then use thin cladding for sides and bottom (T&G cladding dead cheap at Wikes and others)
Compost tray for Potting Shed or Greenhouse
Foundation for DIY shed (ours nearly complete .... it's certainly different and unique on our Lottie site  ;)) 2 pallets laid flat, side by side, shed walls built up with pallet boards, roof is scrounged Steel profiled cladding.

When we had an open fire (some years ago) all the remains were burned, nearest we have come to 100% recycling.

just remembered, the heavy base timbers (4" x 4" or similar) great for holding down sheets of black poly and/or membrane

Mikey

[sawfish]

Love that wheelbarrow. I'm going to make one

:)

[mc55]

I visited my folks allotment at the w/e and one of their newer and more enthusiastic members is making a huge chalet type shed from pallets - looks absolutely amazing.  They've also used them to make a fence to enclose their plot.

could make some rustic seating - a bench maybe ?

[carolinej]

x one of their newer and more enthusiastic members is making a huge chalet type shed from pallets

Any chance of a pic, as it sounds really interesting. I want OH to build me somewhere nice to have a cuppa. Maybe it will inspire him ;D

cj :)

[mc55]

Any chance of a pic, as it sounds really interesting. I want OH to build me somewhere nice to have a cuppa. Maybe it will inspire him

I'll put a request in, but it might take a little time - dad is having heart surgery next week.

[carolinej]

I'll put a request in, but it might take a little time - dad is having heart surgery next week.

dont worry about the pic. You have enough to be going on with. Hope your Dad gets well soon.

cj :)

[jennym]

If you want whatever you build to last, you might find it a good idea to treat the timber with a wood preservative, as I've found that pallet timber tends to rot quite quickly.

[cambourne7]

but how do you get the pallets apart??

Whenever i try they split!

[Deb P]

Having watched OH take apart loads for my raised beds, there is obviously a knack to it.

He suggests using a small crowbar (or a tack remover) hit with a hammer to get behind the nails, then easing the nail only halfway out.

Do the same to the rest of the nails along the length of the piece of wood.

Hit the back of the nails with the hammer until the pointed end is flush with the wood.

Ease the nails out entirely with the crowbar.

Pallet wood is never of the highest quality and will splinter easily if you whack it too hard or overlever it; as we found out! Hope this helps! ;D

[Trixiebelle]

Someone on A4A posted this once. We're making one this summer  :)

http://www.wildlifetrust.org.uk/cheshire/documents/advice_invertebrate_habitat2.pdf

[Deb P]

Someone on A4A posted this once. We're making one this summer  :)

http://www.wildlifetrust.org.uk/cheshire/documents/advice_invertebrate_habitat2.pdf

What a brilliant structure! I want one! ;D