Hi all - I've got a strimmer, with the pipework into the fuel tank fallen apart McCulloch 210, so a plstic tank, I've got some new plastic pipe, but cant figure how to get it through the much smaller hole into the tank - tried putting in water to soften, but no avail.
Suggestions appreciated
We've got a McCulloch strimmer. Can't remember the model number. I'll have a look at it this evening and see how it's assembled. I take it the pipe is the one from the fuel tank to the carb? Goes via the little squeeze bulb IIRC?
If you have the full model number and serial number from the plate on the machine, you might be able to find help here
http://www.buymtdonline.com/webapp/wcs/stores/servlet/Home_BuyMTDOnline_10101_19502_-1 (http://www.buymtdonline.com/webapp/wcs/stores/servlet/Home_BuyMTDOnline_10101_19502_-1)