Allotments 4 All
Allotment Stuff => The Basics => Topic started by: a1rogers on May 24, 2007, 08:42:20
-
Hi all - I've got a strimmer, with the pipework into the fuel tank fallen apart McCulloch 210, so a plstic tank, I've got some new plastic pipe, but cant figure how to get it through the much smaller hole into the tank - tried putting in water to soften, but no avail.
Suggestions appreciated
-
We've got a McCulloch strimmer. Can't remember the model number. I'll have a look at it this evening and see how it's assembled. I take it the pipe is the one from the fuel tank to the carb? Goes via the little squeeze bulb IIRC?
-
If you have the full model number and serial number from the plate on the machine, you might be able to find help here
http://www.buymtdonline.com/webapp/wcs/stores/servlet/Home_BuyMTDOnline_10101_19502_-1 (http://www.buymtdonline.com/webapp/wcs/stores/servlet/Home_BuyMTDOnline_10101_19502_-1)