Allotments 4 All

Allotment Stuff => The Basics => Topic started by: a.buaras on December 13, 2006, 08:38:27

Title: Question????
Post by: a.buaras on December 13, 2006, 08:38:27
hello
My lotti is 79 X 16 ft is that a plot or a half ?

Title: Re: Question????
Post by: agapanthus on December 13, 2006, 08:51:25
a plot (10 rod) is around 30' x 90'.....so yours is about a half plot..:)
Title: Re: Question????
Post by: Robert_Brenchley on December 13, 2006, 10:00:19
Depends on the local allotment size, which varies. On my site that would be about 1/4 plot, but some sites have much smaller plots.
Title: Re: Question????
Post by: supersprout on December 13, 2006, 11:43:29
Quarter plot here too :)
Title: Re: Question????
Post by: Curryandchips on December 13, 2006, 12:44:47
On my site, a 'standard' is 300 sq yds, whereas I have a full, or 'double' plot, of 600 sq yds.
Title: Re: Question????
Post by: Barnowl on December 13, 2006, 13:34:25
Our standard is about 55ft x 25ft which seems to be a half plot by most others' reckoning.
Title: Re: Question????
Post by: saddad on December 13, 2006, 17:26:46
Our standard is 300 sq yards as well...
 ::)
Title: Re: Question????
Post by: pete10 on December 13, 2006, 17:50:54
My plot is 8 pole whats that in yards ?
Title: Re: Question????
Post by: Curryandchips on December 13, 2006, 18:45:19
A pole, or perch or rod as a unit of area, means a square pole, perch or rod, which is 5.25 yds by 5.25 yds, this giving an area of 27.5 sq yds.
Title: Re: Question????
Post by: kt. on December 13, 2006, 19:48:14
On my site there are different sizes. They are all supposed to be the same but you can clearly see some bigger than others.
Title: Re: Question????
Post by: Merry Tiller on December 13, 2006, 20:30:18
As Agapanthus said, the standard plot size was always 10 rods, these days I think they just split areas up into random sizes, I have one 6 rod plot And one of 5 rods
SimplePortal 2.3.5 © 2008-2012, SimplePortal